The WonPad is made right here in Idaho Falls, Idaho. We use high quality, shock absorbing felt, 100% cowhide leathers, and scuba-grade neoprene to create a saddle pad that stays in place and is also easy to clean.
Trucks arrive at our warehouse regularly to keep the WonPad manufacturing process moving. Our rolls of felt, stacks of neoprene, drums of glue, and pile of leathers are cut, measured, marked, glued, sewn, branded, glued again, trimmed, and punched out to create beautiful stacks of WonPads ready for shipping to your doorstep.
Every WonPad comes with our 7 day money back guarantee. Saddle up and take a ride! If you are not completely satisfied with our pad for any reason, return it to the dealer where you purchased the pad within 7 days for a full refund. Please note, refunds do not include shipping charges.
Liner Series
Our Liner Series is designed to go under another pad. It features thin, 1/4″ black felt, assorted brown corner wear leathers, and a smooth 4.5mm neoprene bottom. Size choices include a 30″ length or a 32″ length.
No additional color choices of felt or leathers are available for liners at this time.
Vents & Corners:
Small Round Corner – The pad has a slightly rounded corner matching the attached corner wear leather.
Single Regular Vent – This pad has one vent hole in the front of the pad.
WonPad Care
Follow these tips to extend the life of your WonPad:
Wash the neoprene regularly with mild soap and water, especially after a sweaty ride. Make sure to remove all soap residue from the surface before putting it up to dry, and do not lay it out in the sun. Also, never use cleaners that contain bleach or other harsh chemicals.
Avoid pulling your pad across wooden or metal racks that may catch the neoprene causing cuts and tears. Whenever possible, lift the WonPad up rather than pulling it across any surface.
Avoid pushing your pad into tight spaces, such as small trailer tackrooms, as folding or crumpling the felt may cause the surface of the felt to ball up, separate between layers, and/or separate the neoprene from the felt.
Never cut your pad. Felt is created in layers, and the edges are stitched to keep the pad intact. Cutting the pad will encourage the layers to separate.






